Audio: Section views and detailed views on engineering drawing
In Introduction to engineering drawings, we showed you the building blocks of engineering drawing. Sometimes using main orthographic views is impossible to show all the features of an object to the degree that the object is sufficiently described for manufacturing. In those cases, we have very powerful tools available to us. In this article, we will discuss the types of section views and detailed views that will assist us in clarifying our design intent. Before starting with this text, I suggest you familiarize yourself with the Projection methods on engineering drawings.
Table of Contents
Section views
Most of us have seen lumberjacks with the chainsaw in action, either live or on TV. They take a log, start a chainsaw and cut it into two pieces. The cutting results are two pieces of log, and if we looked into the face of one of them, we would be able to see wood rings.
Let us look at this from the engineering perspective. A similar principle stated above, we are using when creating a section view. The only difference is that we are cutting virtual objects, and we are not using a chainsaw. So, imagine that we have a virtual object (log) and are using the virtual cutting plane (a chainsaw) to split our object into two pieces. The result, when looked into, would be a section view (wood rings).
If our object has a complex geometry and we need to show this geometry clearly and unambiguously, the most convenient way is to use a section view. Not only is using section views the most convenient way but using section views is the best way to show the object’s interior. As I said, this is accomplished using the virtual cutting plane cutting through the body. Like our example with the chainsaw cutting logs in two pieces, we are doing the same to our object on the drawing.
The picture above only represents the idea of cutting the object, but on the engineering drawing, this is not how we will display the section view. Moreover, the rules for creating section views are strictly defined by ISO 128-3:2022.
Elements of the section views
The picture below shows how our object would be represented in the engineering drawing. The main elements of the section view are:
- section line,
- section reference arrow,
- section reference letters,
- hatch.
We will go step by step, explaining every element of the section view.
Section line – considering that 3D object representation is used for the visualization (pictorial projection), for specifying object dimensions, we are using orthographic projections. Bearing in mind that the orthographic projection represents the object in 2D, we have to somehow represent the 3D virtual cutting plane in 2D. For that, we are using the section line. In the picture below, we can see our object cut in 3D with the virtual cutting plane. If we would look at the object in 2D from side A, we can see exactly what our section line is representing: the position of the virtual cutting plane in 2D on our object
Section reference arrows – on the picture above, we saw the transition of the cutting plane from a 3D to a 2D orthographic view. But we will not show a 3D projection of the virtual cutting plane position and the direction of view on the 3D object every time we create a section. Instead, we will only create an orthographic view and create a section from there. We are going to point the direction of the section view with the use of the section reference arrows.
Section reference letters – now look at the picture above. We have defined the section line and the section identification arrows, but there is still something missing. A section identification letters! Imagine that you are creating a drawing with 10 different section views. It would be difficult and time-consuming to match every section line with its corresponding section view. In order to maintain clarity and unambiguity, we are adding two equal capital letters to the section identification arrows. When you look at the picture below, we can see it is quite easy to find any section view on the drawing. Keep in mind that if your section view is displayed in a different scale than the overall drawing, that should be indicated below the section identification letters.
Hatch – now look at the picture above one more time. Looking at the section view, it is hard to understand which area is cut and which is not. To make this clear, we are using crosshatching. Every surface that is cut is marked with a thin line, 45° tilted with respect to the main contour. We are calling this surface pattern a hatch.
Let us now look at our orthographic view with a section view without any remarks on the picture.
And this is my friend, how you create a section view on the engineering drawing.
Of course, the ISO 128-3:2022 standard defines the type of the section line and the shape and size of the section identification arrows, fonts, etc. But as we are using CAD software to create the drawings, CAD software has already implemented ISO rules. For that reason, these details have been left out of this text.
Now that we know how to create a section view and the elements of the section view, the story about the section views does not end here. The example I showed you before belongs to the group of full sections. We also have modifications of the full section: offset and aligned sections. We also have half and partial sections. And partial sections, we can further divide into breakout and crop sections.
Full section views
The full section represents a complete section of the body, i.e., the virtual cutting plane extends through the complete object. We have already shown you the example of the full section.
Offset section views
We can consider the offset section to be a modification of the full section. In the offset section, the virtual cutting plane theoretically cuts through the whole object, except that the cutting surface is stepped. The changes in directions are 90°. The size and location of each step are not strictly defined; it depends on the geometry that we would like to show with the section view. Using a stepped virtual cutting plane, we can show more details with one section, for which we would usually need multiple section views.
Aligned section views
Like the offset section, the aligned section cutting plane changes directions, usually in the range of 0<α< 90°.
Half section views
The half section shows both the view and the section. The centerline on the section view separates the unsanctioned view from the sectioned view. The hidden lines should remain hidden unless they improve clarity. The half section is really useful when we have a symmetrical part around the plane or the axis.
Partial section views
The partial section views are used when the internal contour in certain areas wants to be exposed and when the full section would not reveal any additional details. Often partial section is also called the breakout section.
Conventional breaks
Imagine that you have to create a drawing of a pipe that is two meters long with two flanges, one on each end. In order to fit this part on the drawing, you must use a large reduction scale. For example, in the drawing below, I used the A3 sheet size with a scale of 1:20.
In these cases, when we have long objects with constant shapes throughout their length, we can use a conventional brake to shorten it on the drawing. This allows us to use a smaller sheet size, save space on the drawing, and use a bigger scale. In the drawing below, I used the conventional brake on A3 sheet size with a scale of 1:2. If you compare the previous drawing example with the example below, you can see that clarity of the drawing is improved drastically.
Unsenctioned features
When creating a section view, some of the components or features are intentionally left unsectioned because sectioning them would not give a clear definition of the object.
The Components like shafts, studs, rivets, pins, screws, nuts, washers, feather keys, rolling bearing bodies, knobs on handwheels, lugs, ribs, spokes, gear teeth, etc., are left unsanctioned.
Usually, these components and features are cut only transversally and not longitudinally.
I already mentioned that you will most likely use CAD software to create drawings (and on the drawings section and detailed views). Unsectioning different components in CAD software like Fusion 360 is a straightforward process. For example, when creating a section view, Fusion 360 automatically gives you an option, “Objects To Cut” where you can simply choose which parts you want to cut or leave uncut.Â
Detailed View
When we have a main orthographic view in a scale that does not allow all the features to be clearly represented, we can use a detailed view to enlarge these details. The detailed view is one of the elements you will often use when creating the engineering drawing. Let us take a look into the main element of the detailed view.
The viewing line is placed around the area that we want to enlarge. It can be created as a circle or freehand line around that area.
Detailed view reference letter have the same purpose as section reference letters. We are using it as a detail view identifier. Every detail view should be marked with a capital letter placed near the viewing line and above the detail. I usually like to add the remark “DETAIL” in front of the reference letter. Also, considering that detail view is used for enlarging certain objects, features scale needs to be displayed. I usually add the remark “SCALE” in front of the actual scale. As I already said, when you have many sections and detailed views, I believe that it adds certain clarity to the drawing.
Let us now look at our detail view without any remarks on the picture:
Closing words
Using section and detailed views on your drawings increases the clarity of the drawing. In order to get a full grasp of when to use section and detailed views requires practice. But like in everything else, the more you use and practice it, the better you will get.
With the usage of CAD software, creating section and detailed views is easy and straightforward. With just a few clicks, your CAD software will create a section view, hatch it, scale it, etc. But still, you don’t want to be one of those engineers clicking things around, not caring or knowing why you are doing it. Always keep in mind that software is as smart as the person using it.
Now you have a great overview of the section and detailed views on the engineering drawing. However, I suggest you go through the text once more and identify areas you think need more understanding and clarity. Then, once you have identified those areas, start building up your knowledge in those areas.
To make it easier for you to find related posts, check the “Further reading” chapter below. Do you have any questions or need something to be clarified better? Leave a comment below, and I will give my best to adjust the post accordingly.
Do you like what you read? Then, share it with your friends, colleagues, and on your social media channels. And if you want to become a part of the Newtonians, make sure to subscribe to our newsletter!
Literature
Further reading
Blueprint to Success: Engineering Drawings Masterclass
Download for free the material selection checklist that you can use to communicate with suppliers and present your findings in an organized and clear way.
A COMPREHENSIVE GUIDE TO SURFACE ROUGHNESS IN ENGINEERING DRAWINGS
Read about tolerance analysis and stackup, practical steps, and how to do the worst-case and statistical tolerance stackup analysis.
SURFACE ROUGHNESS REFERENCE SHEET
Download for free the material selection checklist that you can use to communicate with suppliers and present your findings in an organized and clear way.
ONE-DIMENSIONAL TOLERANCE ANALYSIS AND TOLERANCE STACKUP – PART 2
Read about influence of dimensioning methods on tolerance stackup and how to write a proper tolerance stackup report.
ONE-DIMENSIONAL TOLERANCE ANALYSIS AND TOLERANCE STACKUP – PART 1
Read about tolerance analysis and stackup, practical steps, and how to do the worst-case and statistical tolerance stackup analysis.
TOLERANCE STACKUP REPORT
Download for free tolerance stackup report template that you can use to present your findings in an organized and clear way.
ENGINEERING TOLERANCES – FITS
Read about engineering fits, basic terminology, how to select a proper fit and how to show fits on engineering drawings.
ENGINEERING TOLERANCES – INTRODUCTION
Read about engineering tolerances, basic terminology, how to show tolerances on engineering drawing, general tolerances, scope, and how to define tolerances.
ENGINEERING DRAWING – DIMENSIONING
Read about elements of dimensions, rules for dimensioning, dimensioning methods, and functional and non-functional dimensions in engineering drawing.
PROJECTION METHODS ON ENGINEERING DRAWINGS
Read about different types of drawing projection methods, and learn about the most important ones for engineering drawing creation.
BASIC ELEMENTS OF ENGINEERING DRAWINGS
Read about basic elements needed to complete any engineering drawing.
TECHNICAL PRODUCT DOCUMENTATION
Read about Technical Product Documentation and different types of documents that you could encounter as a mechanical design engineer.
INTRODUCTION TO ENGINEERING DRAWINGS
Introduction, application and requirements of engineering drawings. Learn about the detailed (part) and assembly drawings.
Hi! This is kind of off topic but I need some guidance from an established blog. Is it very difficult to set up your own blog? I’m not very techincal but I can figure things out pretty quick. I’m thinking about making my own but I’m not sure where to begin. Do you have any ideas or suggestions? With thanks
Yesterday, while I was at work, my cousin stole my iPad and tested to see if it can survive a twenty five foot drop, just so she can be a youtube sensation. My apple ipad is now destroyed and she has 83 views. I know this is completely off topic but I had to share it with someone!
Definitely imagine that which you said. Your favourite justification seemed to be at the web the simplest thing to consider of. I say to you, I certainly get annoyed even as folks consider worries that they plainly do not realize about. You controlled to hit the nail upon the highest and also defined out the whole thing with no need side effect , other folks could take a signal. Will likely be back to get more. Thank you
Hi, I would like to subscribe for this web site to get newest updates, thus where can i do it please help out.
I visited various websites but the audio quality for audio songs existing at this site is truly excellent.
Remarkable issues here. I’m very glad to peer your article. Thank you a lot and I’m looking ahead to touch you. Will you please drop me a e-mail?
Very good blog! Do you have any tips for aspiring writers? I’m hoping to start my own website soon but I’m a little lost on everything. Would you recommend starting with a free platform like WordPress or go for a paid option? There are so many options out there that I’m totally overwhelmed .. Any ideas? Appreciate it!
Hi there! This is my first visit to your blog! We are a group of volunteers and starting a new initiative in a community in the same niche. Your blog provided us valuable information to work on. You have done a outstanding job!
I’m really enjoying the theme/design of your website. Do you ever run into any browser compatibility issues? A few of my blog audience have complained about my website not operating correctly in Explorer but looks great in Opera. Do you have any advice to help fix this issue?
This text is invaluable. When can I find out more?
I read this post fully about the resemblance of most up-to-date and preceding technologies, it’s remarkable article.
Hello, after reading this remarkable paragraph i am as well glad to share my know-how here with colleagues.
It’s a shame you don’t have a donate button! I’d certainly donate to this fantastic blog! I guess for now i’ll settle for book-marking and adding your RSS feed to my Google account. I look forward to brand new updates and will share this blog with my Facebook group. Talk soon!
You ought to be a part of a contest for one of the most useful blogs online. I’m going to highly recommend this web site!
fantastic submit, very informative. I’m wondering why the opposite experts of this sector do not understand this. You should continue your writing. I’m sure, you’ve a great readers’ base already!
Hi, just wanted to say, I enjoyed this article. It was inspiring. Keep on posting!
It’s amazing designed for me to have a website, which is beneficial in favor of my knowledge. thanks admin
I think the admin of this website is genuinely working hard in favor of his website, since here every data is quality based material.
Nice post. I was checking constantly this blog and I am inspired! Very helpful info specifically the ultimate part 🙂 I deal with such information much. I used to be looking for this particular information for a very long time. Thank you and good luck.
I’m very pleased to find this website. I wanted to thank you for ones time just for this wonderful read!! I definitely loved every little bit of it and I have you saved to fav to check out new things in your website.
After looking into a few of the articles on your blog, I honestly appreciate your technique of writing a blog. I saved it to my bookmark website list and will be checking back soon. Take a look at my web site as well and let me know how you feel.
Highly descriptive post, I loved that bit. Will there be a part 2?
I know this if off topic but I’m looking into starting my own weblog and was curious what all is required to get set up? I’m assuming having a blog like yours would cost a pretty penny? I’m not very internet savvy so I’m not 100% sure. Any recommendations or advice would be greatly appreciated. Appreciate it
Hi! I’m at work browsing your blog from my new iphone 4! Just wanted to say I love reading through your blog and look forward to all your posts! Keep up the fantastic work!
Hmm is anyone else encountering problems with the pictures on this blog loading? I’m trying to find out if its a problem on my end or if it’s the blog. Any feed-back would be greatly appreciated.
We are a group of volunteers and opening a new scheme in our community. Your web site offered us with valuable info to work on. You have done an impressive job and our whole community will be grateful to you.